Pioneer Oil field Services, LLC

“Utilizing Today’s Technology, Driven By Traditional Values”

 

Home
Management Summary
Rig Descriptions
About the Company
Safety & Training
Contact Us
Request A Bid

 

Rig #14 Inventory      Rig #15 Inventory      Rig #16 Inventory

Rig # 14

Rig #14

Rig # 14 Inventory

Draw Works 5,000 feet Rated

 Drawworks:

1959 National T-12 Single Drum Drawworks powered by 525 HP Series 60 Detroit Diesel, Drum  grooved for 1” line, Foster makeup & breakout catheads, air drillers controls.  (Rebuilt July 2007, replaced all bearings, clutches, sprockets & chains)

Derrick:

1960 model 90 feet 6 inch, 300,000 lb, P.J. Jackknife Derrick, Lee C. Moore Crown Sheaves, 4” 4000 psi standpipe, racking board, and ladder. (Crown sheaves rebuilt July 2007) 

Substructure :  None

Powered Pumps:

#1 Wilson 600 Duplex, 6 ½” by 14” 600 HP max at 95 spm.  forged steel fluid end w/ quick-change caps, relief valve, pressure gauge, master skid, powered by 600 HP John Deere with air clutch. Normally stocked with 5 ½” & 6” liners.  (Pump rebuilt July 2007)

Dog House & Fuel Tank Skid:

Dog House: 8’ width x 20’ length skid mounted, insulated doghouse with knowledge box, lockers, G.H. Bear automatic driller, Electric heat.

Fuel Tank: 3,000 gallon diesel fuel tank mounted on skid with dog house

Water Tank :

125 bbl, 7’ 1” width x 10’ 1” length x 15‘ 2” height water tank mounted on pipe tub

Generator Set:

Kholer 30 kw light plant power by 4 cylinder John Deere diesel. 

Recording & Monitoring Equipment: Rig equipped with Double Pen Geolograph (Rebuilt Spring 2007) 

Handling Tools & Auxiliary Tools:

BJ Style Type C tongs with heads sizes from 3 ½” to 10 3/4”. (New July 2007)

4 ½” Drill Pipe slips

5 ½” through 7” Drill Collar slips

Drill Collar Safety Clamp

Elevators: 4 ½” BN, 4 ½” casing, 5 ½” casing, 8 5/8” casing

Cat head & Boom line, both with 1” rope

Martin Decker Clipper Weight Indicator (New July 2007)

4” ID Rotary Hose (New Spring 2007)

1 Center Tub with 10 foot casing extension,

4 Pipe Tubs

Sure Shot deviation tool with wire line unit

Rotating & Traveling Equipment:

Gardner Denver 17 ½” Rotary Table (Rebuilt July 2007)

TSM 150 Swivel

4 Ό” square Kelly 37.10 feet overall length, 35.75 working length

Varco square drive Kelly drive bushings

Rat Hole and Stand pipe on Driller Side

EMSCO 100 ton, 6 line traveling blocks with BJ 540 hydra-hook (Rebuilt 2007)

1” Drill Line

2 3/8” X 96” Elevator Links

Well Control Equipment:

Regan 8” 3000 lbs annular BOP (Rebuilt mid 2006)

No closing unit

Drill Pipe & Drill Collars:

14 each 6 ½” 96 #/ft 4 ½” XH Thread, HB, Slip Recessed Drill Collars (6 1/2” OD, 2 Ό” ID)(New July 2007)

5000 feet of 4 ½” 16.6 #/ft Grade E Drill Pipe with 4 ½” XH HB BN tool joints 

Change Over Subs with Rig:

1 each Bell Sub 6 5/8 Regular box by 4 ½” XH Pin, 26” long, 8” OD top, 6 Ό” OD Bottom

1 each 4 ½” XH Box by 4 ½” Regular Box with float cut out 

©2013 Pioneer Oil Field Services, LLC